Каталог

Fluke 1587/ET Kit

цена по запросу

шт.

Fluke1587/ET Advanced Electrical Troubleshooting Kit

Описание Характеристики Файлы

Модель Название	Описание
Fluke 1587/ET Kit	Includes: Fluke 1587 Insulation Multimeter Fluke i400 Current Clamp Fluke 62 MAX+ IR Thermometer

Establishing preventative maintenance programs are becoming critical to maintaining the uptime of electrical equipment and can significantly reduce both planned and unplanned downtime. Unplanned downtime costs are difficult to calculate, but often significant. For some industries, it can represent 1 % - 3 % of revenue (potentially 30 % - 40 % of profits) annually. The products in this kit have been specifically selected for both troubleshooting and preventative maintenance applications.

Fluke 1587 Insulation Multimeter

With the Fluke 1587, perform insulation tests, plus a wide-range of DMM tasks with confidence and ease.
Two products in one: Powerful and full-featured multimeter.
Ideal for work on motors, cables, and switch gear.
Large display with backlight.
Filter for motor drive measurements.
Insulation test (0.01MΩ to 2GΩ).
Insulation test voltages (50 V, 100 V, 250 V, 500 V, 1000 V) for many applications.
CAT III 1000 V /CAT IV 600 V overvoltage rating for added user protection.

Fluke i400 Current Clamp

Use the Fluke i400 with your Fluke 1587 to accurately measure AC current without breaking the circuit.
Use with your Fluke 1587 to measure 1A AC to 400 A AC.
1 mA/Amp output guarantees easy reading.
CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection.
Specially designed to offer maximum utility in a very compact shape.
Maximum conductor: Ø 32 mm.

Fluke 62 MAX+ IR Thermometer

Dust and water-resistant: IP54 rated.
Rugged: 3-meter (9.8-foot) drop tested.
Ergonomically designed: Completely redesigned for a more natural hand fit.
Distance to spot: 12:1.
Dual lasers: Identifies area to be measured.
Large, backlit display: Makes data easier to read, even in dark areas.

Fluke 1587 Insulation Multimeters

Specifications
Voltage DC	Maximum Voltage	1000 V
	Accuracy	±(0.09%+2)
	Maximum Resolution	0.001V
Voltage AC	Maximum Voltage	1000 V
	Accuracy	±(2%+3)
	AC Bandwidth	5kHz* *with low pass filter; 3db @ 800 Hz
	Maximum Resolution	0.1 mV
Current DC	Maximum Amps	400mA
	Amps Accuracy	±(0.2%+2)
	Maximum Resolution	0.01 mA
Current AC	Maximum Amps	400mA
	Amps Accuracy	±(1.5%+2)* * 1kHz bandwidth
	Maximum Resolution	0.01 mA
Resistance	Maximum Resistance	50 MΩ
	Accuracy	±(0.9%+2)
	Maximum Resolution	0.1Ω
Capacitance	Maximum Capacitance	9,999 µF
	Accuracy	±(1.2%+2)
	Maximum Resolution	1 nF
Frequency	Maximum Frequency	100 kHz
	Accuracy	±(0.1%+1)
	Maximum Resolution	0.01 Hz
Temperature Measurement	-40.0 °C to 537 °C -40.0 °F to 998 °F excluding probe
Diode Test	Range	6 V
	Resolution	1 mV
	Accuracy	±(2 % + 1)

Insulation Test
Minimum Test Current @ 1kΩ/V	1mA
Test Voltages	50, 100, 250, 500, 1000 V
Maximum Resistance per Test Voltage	50V
	100V
	250V
	500V
	1000V	2 GΩ
Maximum Resolution per Test Voltage	50V	0.01 MΩ
	100V	0.01 MΩ
	250V	0.1 MΩ
	500V	0.1 MΩ
	1000V	0.1 MΩ
Accuracy per Test Voltage	50V	±(3 % + 5)
	100V	±(3 % + 5)
	250V	±(1.5 % + 5)
	500V	±(1.5 % + 5)
	1000V	±(1.5 % + 5) to 600 MΩ, ±(10 % + 3) above 600 MΩ

Environmental Specifications
Operating temperature	–20 °C to +55 °C
Storage temperature	-40°C to +60°C
Humidity (Without Condensation)	0% - 95% (10 °C – 30 °C)
	0% - 75% (30 °C – 40 °C)
	0% - 40% (40 °C – 55 °C)
Operating Altitude	2000 m

Safety Specifications
Overvoltage category	Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V
Agency Approvals	2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V

Mechanical & General Specifications
Size	203 x 100 x 50 mm (with holster)
Weight	624 g
Warranty	3 years
Battery life Alkaline	Meter use	1000 hours
	Insulation test use	Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
IP Rating	IP40

i400 AC Current Clamp

Specifications
Nominal current range	400A
Continuous current range	1 A - 400 A
Maximum Non-Destructive Current	1000 A
Lowest measurable current	1 A
Basic accuracy	2% + 0.06 A (45-400 Hz) (% reading + floorspec)
Useable frequency	5 Hz - 20 kHz
Output level(s)	1 mA/A

Safety Specifications
Safety	CAT IV 600 V, CAT III, 1000 V
Maximum voltage	1000 V AC rms from earth to ground, in compliance with EN61010

Mechanical & General Specifications
Warranty	1 year
Maximum conductor diameter	32 mm (1.25 inches)
Maximum conductor size (busbar)	750 MCM
Output cable length	1.5 m (59 inches)
Shrouded banana plugs	Yes

Fluke 62 MAX+ Infrared Thermometer

Specifications
Temperature Range	-30 °C to 650 °C (-22 °F to 1202 °F)
Accuracy	±1.0 °C or ±1.0% of reading, whichever is greater -10 °C to 0 °C: ±2.0 -30 °C to -10 °C: ±3.0
Response Time (95%)	Fluke 62 MAX+	<300 ms (95% of reading)
	Spectral Response	8 to 14 microns
	Emissivity	0.10 to 1.00
Optical Resolution	12:1 (calculated at 90% energy)
Display Resolution	0.1 °C (0.2 °F)
Repeatability of Readings	±0.5% of reading or <±0.5 °C (1 °F), whichever is greater
Power	AA battery
Battery Life	8 hours with laser and backlight on
Physical Specifications	Weight	255 g (8.99 oz)
	Size	(175 x 85 x 75) mm (6.88 x 3.34 x 2.95) inches
	Operating Temperature	0 °C to 50 °C (32 °F to 122 °F)
	Storage Temperature	-20 °C to 60 °C (-4 °F to 140 °F), (without battery)
	Operating Humidity	10 % to 90 % RH non-condensing at 30 °C (86 °F)
	Operating Altitude	2000 meters above mean sea level
	Storage Altitude	12,000 meters above mean sea level
	IP Rating	IP 54 per IEC 60529
	Drop Test	3 meters
	Vibration and Shock	IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
	EMC	EN 61326-1:2006 EN 61326-2:2006
Standards and Agency Approval	Compliance	EN/IEC 61010-1: 2001
Standards and Agency Approval	Laser Safety	FDA and EN 60825-1 Class II

Корзина