Каталог

Tektronix DMM4020

цена по запросу
шт.

Стендовые мультиметры DMM4020 (5,5 разрядов), DMM4050 и DMM4040 (6,5 разрядов) общего назначения предлагают универсальный набор функций, позволяющих проводить наиболее сложные измерения на стенде или в системе. Эти цифровые мультиметры имеют возможности многофункционального цифрового мультиметра, включая измерения напряжения, сопротивления, тока и частоты. Кроме того, при помощи DMM4050 можно проводить измерения температуры и емкости.

Описание Характеристики Файлы

Features & Benefits

Key Performance Specifications

  • 5.5 Digit Resolution
  • Basic VDC Accuracy of up to 0.015% (1 yr.)
  • 200 mV to 1000 V Voltage Range, with up to 1 μV Resolution
  • 200 μA to 10 A Current Range, with up to 1 nA Resolution
  • 200 Ω to 100 MΩ Range, with up to 1 mΩ Resolution
  • CAT I 1000 V, CAT II 600 V

Available Functions and Features

  • Volts, Ohms, and Amps Measurements
  • True RMS (AC, AC + DC) Measurements
  • Diode and Continuity Testing
  • Frequency Measurements
  • 2×4 Ohms 4-wire Measurement Technique
  • Dedicated DC Leakage Current Measurements
  • Six Dedicated Buttons for Fast Access to Instrument Setups
  • Limit Compare Mode for Pass/Fail Testing

Connectivity

  • Front 2×4 Measurement Inputs
  • RS-232 on Rear Panel for Quick PC Connectivity
  • Includes USB to RS-232 Interface Adapter Cable
  • Includes National Instrument’s LabVIEW SignalExpress™ TE Limited Edition for Connecting Your Bench

3-year Warranty

Measurements with the Push of a Button

As the circuits in embedded system designs become more sophisticated, you must measure a multitude of different parameters to validate your design. The Tektronix DMM4020 5.5 digit bench multimeter offers a broad range of functions in one easy-to-use instrument.

Typical multimeter measurements – volts, ohms, and amps – are made with a basic VDC accuracy of up to 0.015%, ensuring you have the performance you need for your design. You can also use the DMM4020 to measure frequency, and to perform continuity and diode tests. This allows you to replace your counter, continuity tester, and DMM with one versatile instrument, saving bench space and cost.

Measure Nanoampere Signals

Measuring standby current in today’s energy-efficient designs requires looking at very low currents, often in the microamp or nanoamp range. Using a traditional multimeter for this measurement can lead to inaccurate results since they typically employ the shunt resistance technique for measuring current.

The DMM4020 offers an improved method for measuring low currents. By using a current-to-voltage op amp technique, the DMM4020 can make current measurements with 1 nA of resolution and with minimal loading affect on the circuit under test, giving results that reflect real-world operation of the device.

Designed to Make Your Work Easier

The DMM4020 multimeter is designed with the ease of use and familiar operation you expect from Tektronix.

Intuitive Operation

Dedicated front-panel buttons provide fast access to frequently used functions and parameters, reducing setup time. You no longer need to search through software menus to find the function you need.

Setup Buttons for Your Common Measurements

With six setup buttons on the front panel, you can save the settings for your most common measurements. Simply set up the meter for a measurement, then press shift followed by a setup button to save the measurement settings. Now each time you perform that measurement, you simply press the appropriate setup key.

Dual Display

With the unique dual display, you can measure two different parameters of the same signal from one test connection.

Limit Compare



Limit compare mode on the DMM4020.

The limit compare mode provides pass/fail indicators to quickly show if a test passes or fails to help eliminate mistakes, especially for results that are close to the limit.

Simple and Accurate 4-wire Measurements

Patented split terminal jacks for the 2×4 ohms function allow you to perform 4-wire measurements using only two leads instead of four. Special test lead accessories are available to enable you to establish the connection. You get excellent resolution and accuracy plus the convenience and ease of using a single pair of leads.

Easy Connectivity to Your PC

The RS-232 port on the back panel can be used to connect to your PC. A USB to RS-232 interface adapter cable is included standard with the DMM4020 for connecting to your PC’s USB port.

Connect Your Bench for Intelligent Debug



SignalExpress acquiring data from Tektronix DMM4020 and DPO3052.



SignalExpress used to export DMM4020 data into Excel.

Easily capture, save, and analyze measurement results from your multimeter with the special Tektronix Edition of National Instrument’s LabVIEW SignalExpress™ software. Every DMM4020 multimeter ships with a free copy of the Limited Edition version of SignalExpress for basic instrument control, data logging, and analysis. The optional Professional Edition offers over 200 built-in functions that provide additional signal processing, advanced analysis, sweeping, limit testing, and user-defined step capabilities.

SignalExpress supports the range of Tektronix bench instruments*1, enabling you to connect your entire test bench. You can then access the feature-rich tools packed into each instrument from one intuitive software interface. This allows you to automate complex measurements requiring multiple instruments, log data for an extended period of time, time correlate data from multiple instruments, and easily capture and analyze your results, all from your PC. Only Tektronix offers a connected test bench of intelligent instruments to simplify and speed debug of your complex design.

Performance You Can Count On

In addition to industry-leading service and support, every DMM4020 multimeter comes backed with a three-year standard warranty.

*1 NI LabVIEW SignalExpress supports the following Tektronix instruments: MSO/DPO4000/3000/2000 Series oscilloscopes, TDS3000C/2000B/1000B Series oscilloscopes, AFG3000 Series arbitrary/function generators, DMM4050/4040/4020 Series digital multimeters.

Ordering Information

Models

Model

Description

DMM4020

5.5 Digit Multimeter

 

DMM4020 Includes: Meter, TL710 Test Leads, Line Cord, Statement of Cal Practices, Safety and Installation Instructions including Warranty Statement, CD-ROM with User Manual (English, French, Italian, German, Spanish, Simplified Chinese, Traditional Chinese, Korean, Russian, Japanese) and Connectivity Information, RS-232 to USB Adapter Cable, National Instruments LabVIEW SignalExpress™ Tektronix Edition, Limited Edition Software.

Please specify power plug when ordering.

Instrument Options

Power Plug Options

Option

Description

Opt. A0

North America

Opt. A1

Universal Euro

Opt. A2

United Kingdom

Opt. A3

Australia

Opt. A5

Switzerland

Opt. A6

Japan

Opt. A10

China

Opt. A11

India

Opt. A12

Brazil

Opt. E1

Euro and UK power cords

Service Options*6

Option

Description

Opt. CA1

Provides a single calibration event or coverage for the designated calibration interval, whichever comes first

Opt. R5

Repair Service 5 Years (including warranty)

*6 Test Leads and accessories are not covered by the DMM warranty and Service Offerings. Refer to the datasheet of each Test Lead and accessory model for its unique warranty and calibration terms.

Recommended Accessories and Software

Accessory

Description

Calibration Manual

077-0365-xx

196-3520-xx

Premium Test Leads (replacement/spare for TL710)

TL705

2×4 Wire Ohm 1000 V Precision Test Lead

TL725

2×4 Wire Ohm SMD Test Tweezers

ACD4000

Soft Transit Case

HCTEK4321

Hard Carrying Case

RMU2U

Rackmount Shelf Kit for 1 or 2 Units

013-0369-xx

Calibration Fixture 4-terminal short

196-3520-00

TL710 Premium Test Lead

SIGEXPTE

NI LabVIEW SignalExpress Tektronix Edition Software – Full Version

Модель Максимальное разрешение Интерфейсы
DMM4020 5,5 USB / RS232

Characteristics

General Specifications

Voltage

Characteristic

Description

100V Setting

90 V to 110 V

120V Setting

108 V to 132 V

220V Setting

198 V to 242 V

240V Setting

216 V to 264 V

Frequency

47 Hz to 440 Hz

Power Consumption

15 VA peak (10 W average)

Dimensions

Dimension

mm

in.

Height

88

3.46

Width

217

8.56

Depth

297

11.7

Weight

kg

lb.

Net

2.1

4.6

Display

Vacuum Fluorescent Display, segment

Environment

Characteristic

Description

Temperature

   Operating

0 °C to 50 °C

   Storage

–40 °C to 70 °C

   Warm Up

½ hour to full uncertainty specifications

Relative Humidity (noncondensing)

   Operating

Uncontrolled (<10 °C)

<90% (10 °C to 28 °C)

<75% (28 °C to 40 °C)

<45% (40 °C to 50 °C)

   Storage

<95% (–40 °C to 70 °C)

Altitude

   Operating

2,000 meters

   Storage

12,000 meters

Vibration

Complies with MIL-PRF-28800F Class 3

Safety

Complies with IEC 61010-1:2001, ANSI/ISA 61010-1 (S82.02.01):2004, UL 61010-1:2004, CAN/CSA C22.2 No. 61010.1:2004, CAT I 1000V / CAT II 600 V

EMC

Designed to comply with IEC 61326-1:1997+A1:1998+A2:2000

 

Triggering

Characteristic

Description

Trigger Delay

400 ms

External Trigger Delay

<2 ms

External Trigger Jitter

<1 ms

Trigger Input

TTL Levels

Trigger Output

5 V max

Math Functions

Min/Max, relative, hold, compare, and dB functions

Multiple Measurement Combinations

Secondary Function

Primary Function

DC V

AC V

DC I

AC I

FREQ

OHMS

DC V

X

X

X

X

 

 

AC V

X

X

X

X

X

 

DC I

X

X

X

X

 

 

AC I

X

X

X

X

 

 

FREQ

 

X

 

 

X

 

OHMS

 

 

 

 

 

X

Electrical

Characteristic

Description

Input Protection

1000 V all ranges

Overrange

10% on the largest ranges of all functions except continuity and diode test

Remote Interfaces

RS-232C (RS-232 to USB Adapter cable included)

Warranty

Three years

Electrical Specifications

DC Voltage Specifications

Specifications are valid for 5½ digit mode and after at least a half-hour warm up.

Characteristic

Description

Maximum Input

1000 V on any range

Common Mode Rejection

120 dB at 50 or 60 Hz 0.1% (1 kΩ unbalance)

Normal Mode Rejection

80 dB at Slow Rate

A/D Nonlinearity

15 ppm of range

Input Bias Current

<30 pA at 25 °C

Settling Considerations

Measurement settling times are affected by source impedance, cable dielectric characteristics, and input signal changes

 

Input Characteristics

Range

Full Scale

(5½ Digits)

Resolution

Input Impedance

Slow

Medium

Fast

200 mV

199.999 mV

1 μV

10 μV

10 μV

>10 GΩ*2

2 V

1.99999 V

10 μV

100 μV

100 μV

>10 GΩ*2

20 V

19.9999 V

100 μV

1000 μV

1000 μV

10 MΩ ±1%

200 V

199.999 V

1 mV

10 mV

10 mV

10 MΩ ±1%

1000 V

1000.00 V

10 mV

100 mV

100 mV

10 MΩ ±1%

*2 At some dual-display measurements, the input impedance of 200 mV and 2 V ranges may be changed to 10 MΩ.

Accuracy

Range

Uncertainty*3

Temperature Coefficient/°C

Outside 18 - 28 °C

90 days

1 year

23 °C ±5 °C

23 °C ±5 °C

200 mV

0.01 + 0.003

0.015 + 0.004

0.0015 + 0.0005

2 V

0.01 + 0.002

0.015 + 0.003

0.001 + 0.0005

20 V

0.01 + 0.003

0.015 + 0.004

0.0020 + 0.0005

200 V

0.01 + 0.002

0.015 + 0.003

0.0015 + 0.0005

1000 V

0.01 + 0.002

0.015 + 0.003

0.0015 + 0.0005

*3 Uncertainty given as ±(% of reading + % of range).

AC Voltage Specifications

AC Voltage specifications are for AC sinewave signals >5% of range. For inputs from 1% to 5% of range and <50 kHz, add an additional error of 0.1% of range, and for 50 kHz to 100 kHz, add 0.13% of range.

Characteristic

Description

Maximum Input

750 VRMS or 1000 V peak or 8 × 107 Volts-Hertz product

Measurement Method

AC-coupled true RMS. Measures the AC component of input with up to 1000 VDC bias on any range

AC Filter Bandwidth

20 Hz - 100 kHz

Common Mode Rejection

60 dB at 50 Hz or 60 Hz (1 kΩ unbalance)

Maximum Crest Factor

3:1 at Full Scale

Additional Crest Factor Errors (<100 Hz)

Crest Factor 1-2, 0.05% of full scale

Crest Factor 2-3, 0.2% of full scale

Only applies for non-sinusoid signals

 

Input Characteristics

Range

Full Scale

(5½ Digits)

Resolution

Input Impedance

Slow

Medium

Fast

200 mV

199.999 mV

1 μV

10 μV

10 μV

1 MΩ ±2% shunted by <100 pf

2 V

1.99999 V

10 μV

100 μV

100 μV

20 V

19.9999 V

100 μV

1000 μV

1000 μV

200 V

199.999 V

1 mV

10 mV

10 mV

750 V

750.00 V

10 mV

100 mV

100 mV

Accuracy

Range

Frequency

Uncertainty*3

Temperature Coefficient/°C

Outside 18 - 28 °C

90 days

1 year

23 °C ±5 °C

23 °C ±5 °C

200 mV

20 Hz - 45 Hz

0.8 + 0.05

0.9 + 0.05

0.01 + 0.005

45 Hz - 20 kHz

0.15 + 0.05

0.2 + 0.05

0.01 + 0.005

20 kHz - 50 kHz

0.3 + 0.05

0.35 + 0.05

0.01 + 0.005

50 kHz - 100 kHz

0.8 + 0.05

0.9 + 0.05

0.05 + 0.01

2 V

20 Hz - 45 Hz

0.8 + 0.05

0.9 + 0.05

0.01 + 0.005

45 Hz - 20 kHz

0.15 + 0.05

0.2 + 0.05

0.01 + 0.005

20 kHz - 50 kHz

0.3 + 0.05

0.35 + 0.05

0.01 + 0.005

50 kHz - 100 kHz

0.8 + 0.05

0.9 + 0.05

0.05 + 0.01

20 V

20 Hz - 45 Hz

0.8 + 0.05

0.9 + 0.05

0.01 + 0.005

45 Hz - 20 kHz

0.15 + 0.05

0.2 + 0.05

0.01 + 0.005

20 kHz - 50 kHz

0.3 + 0.05

0.35 + 0.05

0.01 + 0.005

50 kHz - 100 kHz

0.8 + 0.05

0.9 + 0.05

0.05 + 0.01

200 V

20 Hz - 45 Hz

0.8 + 0.05

0.9 + 0.05

0.01 + 0.005

45 Hz - 20 kHz

0.15 + 0.05

0.2 + 0.05

0.01 + 0.005

20 kHz - 50 kHz

0.3 + 0.05

0.35 + 0.05

0.01 + 0.005

50 kHz - 100 kHz

0.8 + 0.05

0.9 + 0.05

0.05 + 0.01

750 V

20 Hz - 45 Hz

0.8 + 0.05

0.9 + 0.05

0.01 + 0.005

45 Hz - 20 kHz

0.15 + 0.05

0.2 + 0.05

0.01 + 0.005

20 kHz - 50 kHz

0.3 + 0.05

0.35 + 0.05

0.01 + 0.005

50 kHz - 100 kHz

0.8 + 0.05

0.9 + 0.05

0.05 + 0.01

*3 Uncertainty given as ±(% of reading + % of range).

Resistance

Specifications are for 4-wire resistance function, or 2-wire resistance with REL. If REL is not used, add 0.2 Ω for 2-wire resistance plus lead resistance.

Characteristic

Description

Measurement Method

Current source referenced to LO input

Max Lead Resistance (4-wire ohms)

10% of range per lead for 200 Ω, 2 kΩ ranges. 1 kΩ per lead on all other ranges

Input Protection

1000 V on all ranges

 

Input Characteristics

Range

Full Scale

(5½ Digits)

Resolution

Current Source

Slow

Medium

Fast

200 Ω

199.999 Ω

0.001 Ω

0.01 Ω

0.01 Ω

0.8 mA

2 kΩ

1.99999 kΩ

0.01 Ω

0.1 Ω

0.1 Ω

0.8 mA

20 kΩ

19.9999 kΩ

0.1 Ω

1 Ω

1 Ω

0.08 mA

200 kΩ

199.999 kΩ

1 Ω

10 Ω

10 Ω

0.008 mA

2 MΩ

1.99999 MΩ

10 Ω

100 Ω

100 Ω

0.9 μA

20 MΩ

19.9999 MΩ

100 Ω

1 kΩ

1 kΩ

0.16 μA

100 MΩ

100.000 MΩ

1 kΩ

10 kΩ

10 kΩ

0.16 μA || 10 MΩ

Accuracy

Range

Uncertainty*3

Temperature Coefficient/°C

Outside 18 - 28 °C

90 days

1 year

23 °C ±5 °C

23 °C ±5 °C

200 Ω

0.02 + 0.004

0.03 + 0.004

0.003 + 0.0006

2 kΩ

0.015 + 0.002

0.02 + 0.003

0.003 + 0.0005

20 kΩ

0.015 + 0.002

0.02 + 0.003

0.003 + 0.0005

200 kΩ

0.015 + 0.002

0.02 + 0.003

0.003 + 0.0005

2 MΩ

0.03 + 0.003

0.04 + 0.004

0.004 + 0.0005

20 MΩ

0.2 + 0.003

0.25 + 0.003

0.01 + 0.0005

100 MΩ

1.5 + 0.004

1.75 + 0.004

0.2 + 0.0005

*3 Uncertainty given as ±(% of reading + % of range).

DC Current

Characteristic

Description

Input Protection

Tool-accessible 11 A / 1000 V and 440 mA / 1000 V fuses

Shunt Resistance

0.01 Ω for 2 A and 10 A ranges

1 Ω for 20 mA and 200 mA

Burden voltage <5 mV for 200 μA and 2 mA range

 

Input Characteristics

Range

Full Scale

(5½ Digits)

Resolution

Burden Voltage

Slow

Medium

Fast

200 μA

199.999 μA

0.001 μA

0.01 μA

0.01 μA

<5 mV

2 mA

1999.99 μA

0.01 μA

0.1 μA

0.1 μA

<5 mV

20 mA

19.9999 mA

0.1 μA

1 μA

1 μA

<0.05 V

200 mA

19.9999 mA

1 μA

10 μA

10 μA

<0.5 V

2 A

1.99999 A

10 μA

100 μA

100 μA

<0.1 V

10 A

10.0000 A

100 μA

1 mA

1 mA

<0.5 V

Accuracy

Range

Uncertainty*3

Temperature Coefficient/°C

Outside 18 - 28 °C

90 days

1 year

23 °C ±5 °C

23 °C ±5 °C

200 μA

0.02 + 0.005

0.03 + 0.005

0.003 + 0.001

2 mA

0.015 + 0.005

0.02 + 0.005

0.002 + 0.001

20 mA

0.03 + 0.02

0.04 + 0.02

0.005 + 0.001

200 mA

0.02 + 0.005

0.03 + 0.008

0.005 + 0.001

2 A

0.05 + 0.02

0.08 + 0.02

0.008 + 0.001

10 A

0.18 + 0.01

0.2 + 0.01

0.008 + 0.001

*3 Uncertainty given as ±(% of reading + % of range).

AC Current

The following AC current specifications are for sinusoidal signals with amplitudes greater than 5% of range. For inputs from 1% to 5% of range, add an additional error of 0.1% of range.

Characteristic

Description

Input Protection

Tool-accessible 11 A / 1000 V and 440 mA / 1000 V fuses

Measurement Method

AC-coupled true RMS

Shunt Resistance

0.01 Ω for 2 A and 10 A ranges

1 Ω for 20 mA and 200 mA

AC Filter Bandwidth

20 Hz - 100 kHz

Maximum Crest Factor

3:1 at Full Scale

Additional Crest Factor Errors (<100 Hz)

Crest Factor 1-2, 0.05% of full scale

Crest Factor 2-3, 0.2% of full scale

Only applies to non-sinusoid signals

 

Input Characteristics

Range

Full Scale

(5½ Digits)

Resolution

Burden Voltage

Slow

Medium

Fast

20 mA

19.9999 mA

0.1 μA

1 μA

1 μA

<0.05 V

200 mA

199.999 mA

1 μA

10 μA

10 μA

<0.5 V

2 A

1.99999 A

10 μA

100 μA

100 μA

<0.1 V

10 A

10.0000 A

100 μA

1 mA

1 mA

<0.5 V

Accuracy

Range

Frequency

Uncertainty*3

Temperature Coefficient/°C

Outside 18 - 28 °C

90 days

1 year

23 °C ±5 °C

23 °C ±5 °C

20 mA

20 Hz - 45 Hz

1 + 0.05

1.25 + 0.06

0.015 + 0.005

45 Hz - 2 kHz

0.25 + 0.05

0.3 + 0.06

0.015 + 0.005

200 mA

20 Hz - 45 Hz

0.8 + 0.05

1 + 0.06

0.015 + 0.005

45 Hz - 2 kHz

0.25 + 0.05

0.3 + 0.06

0.015 + 0.005

2 A

20 Hz - 45 Hz

1 + 0.05

1.25 + 0.06

0.015 + 0.005

45 Hz - 2 kHz

0.25 + 0.05

0.3 + 0.06

0.015 + 0.005

10 A

20 Hz - 45 Hz

1 + 0.1

1.25 + 0.12

0.015 + 0.005

45 Hz - 2 kHz

1 + 0.1

0.5 + 0.12

0.015 + 0.005

*3 Uncertainty given as ±(% of reading + % of range).

Frequency

Characteristic

Description

Gate Time

131 ms

Measurement Method

AC-coupled input using the AC voltage measurement function

Settling Considerations

When measuring frequency after a DC offset voltage change, errors may occur. For the most accurate measurement, wait up to 1 second to allow input-blocking RC time constant to settle

Measurement Considerations

To minimize measurement errors, shield inputs from external noise when measuring low-voltage, low-frequency signals

 

Input Characteristics

Range

Frequency

Uncertainty

Temperature Coefficient/°C

Outside 18 - 28 °C

90 days

1 year

23 °C ±5 °C

23 °C ±5 °C

100 mV to 750 V*4, 5

20 Hz - 2 kHz

0.01 + 0.002

0.01 + 0.003

0.002 + 0.001

2 kHz - 20 kHz

0.01 + 0.002

0.01 + 0.003

0.002 + 0.001

20 kHz - 200 kHz

0.01 + 0.002

0.01 + 0.003

0.002 + 0.001

200 kHz - 1 MHz

0.01 + 0.004

0.01 + 0.006

0.002 + 0.002

*4 Input >100 mV.

*5 Limited to 8 × 107 V Hz.

Continuity

Characteristic

Description

Continuity Threshold

20 Ω

Test Current

1 mA

Response Time

100 S/s with audible tone

Rate

Fast

Maximum Reading

199.99 Ω

Resolution

0.01 Ω

Diode Test

Characteristic

Description

Response Time

100 S/s with audible tone

Rate

Fast

Maximum Reading

1.9999 V

Resolution

0.1 mV

Связанные приборы