Каталог

Tektronix PPG1602

цена по запросу
шт.

Серия PPG высокопроизводительных генераторов цифровых последовательностей компании Tektronix включает многоканальные конфигурации, поддерживающие скорости передачи данных до 40 Гбит/с. Серия PPG может оснащаться опцией добавления джиттера и представляет собой гибкое, недорогое и простое в пользовании решение для тестирования высокоскоростных систем, например 100 Gigabit Ethernet, DP-QPSK, многоуровневых сигналов (амплитудно-импульсная модуляция) и различных тестов приемников. В сочетании с детектором ошибок серии PatternPro® PED компании Tektronix образует полную систему анализа битовых ошибок 40 Гбит/с.

Описание Характеристики Файлы

The Tektronix PatternPro® series programmable pattern generators provide up to four channels of stressed pattern generation for high-speed Datacom testing.

Key performance specifications

  • Low inherent jitter (typical RJ
  • 8 ps typical 20% to 80% rise/fall times (PPG3200 fixed output models)
  • 11 ps typical 20% to 80% rise/fall times (PPG3200 with Option ADJ)
  • Variable output amplitude:
    • 300 mV to 1.0 V for PPG3200 with Option ADJ
    • 250 mV to 2.0 V for PPG1600 and PPG3000 series
  • Low frequency, high amplitude jitter insertion range of 10 Hz to 10 MHz at up to 5000 UI (PPG3200 series with Option LFJIT)
  • BUJ amplitudes up to 50 psp-p with modulation rates up to 2.5 Gb/s (with Option HFJIT)
  • 35% to 65% programmable crossing point (PPG1600 & PPG3000 series)

Key features

  • Available with 1, 2, or 4 output channels of 16, 30, or 32 Gb/s (independent data on all channels)
  • Provides full end-to-end multi-channel BER test solution when paired with the PED series error detector
  • Jitter insertion options include BUJ, SJ, RJ, and PJ
  • Aligned data on multi-channel units
  • Full rate built-in adjustable clock source
  • DC coupled differential data outputs
  • Programmable output amplitude, offset, and crossing point
  • PRBS and user defined patterns
  • Adjustable channel phase delay
  • Front panel touch screen GUI or USB computer control

Applications

  • Multi-channel 25 Gb/s testing for 100 G Ethernet
  • DQPSK and DP-QPSK testing
  • CFP2 and CFP4 testing
  • Multi-level signal testing
  • Semiconductor and component testing

Product description

The Tektronix PatternPro® line of high-performance pattern generators offer single and multi-channel configurations capable of data rates up to 32 Gb/s. With optional jitter insertion, the PPG line offers a flexible, cost effective and easy to use test solution supporting high speed applications such as 100 Gigabit Ethernet, 32G Fibre channel, PAM4, DP-QPSK testing, and a broad range of receiver test applications. The single unit multi-channel configurations provide aligned, pattern-independent data outputs that support testing of crosstalk immunity and multi-channel functionality. The PPG line can be paired with the Tektronix PED line of Error Detector products to provide a complete BER test capability.

Data rate may be programmed over a broad range of values. (32 Gb/s version shown) Output may be either built-in PRBS patterns or programmed user data patterns.

100G Ethernet four lane end-to-end test using PPG3000 series pattern generator and PED3200 series error detector

PPG3202 2-channel PG unit configured with external combiner for PAM4 signal operation

PPG3204 4-channel PG unit configured for DP-QPSK testing with Tektronix Coherent Lightwave Signal Analyzer

Four channel independent output data at 32 Gb/s

32 Gb/s and 14 Gb/s programmed data rates

 

Independently programmable output channels allow comprehensive multi-lane testing. (32 Gb/s version shown.)

PAM4 eye diagram at 28 Gbaud

32 Gb/s custom user data demonstrating programmed data skew values

Ordering information

Models

PPG1601
16 Gb/s programmable pattern generator, 1 channel
PPG1602
16 Gb/s programmable pattern generator, 2 channels
PPG1604
16 Gb/s programmable pattern generator, 4 channels
PPG3001
30 Gb/s programmable pattern generator, 1 channel
PPG3002
30 Gb/s programmable pattern generator, 2 channels
PPG3004
30 Gb/s programmable pattern generator, 4 channels
PPG3201
32 Gb/s programmable pattern generator, 1 channel
PPG3202
32 Gb/s programmable pattern generator, 2 channels
PPG3204
32 Gb/s programmable pattern generator, 4 channels

Options

Instrument options
PPG1601 HFJIT
High frequency jitter option for PPG1601
PPG1602 HFJIT
High frequency jitter option for PPG1602
PPG1604 HFJIT
High frequency jitter option for PPG1604
PPG3001 HFJIT
High frequency jitter option for PPG3001
PPG3002 HFJIT
High frequency jitter option for PPG3002
PPG3004 HFJIT
High frequency jitter option for PPG3004
PPG3201 HFJIT
High frequency jitter option for PPG3201
PPG3202 HFJIT
High frequency jitter option for PPG3202
PPG3204 HFJIT
High frequency jitter option for PPG3204
PPG3201 LFJIT
Low frequency jitter option for PPG3201
PPG3202 LFJIT
Low frequency jitter option for PPG3202
PPG3204 LFJIT
Low frequency jitter option for PPG3204
PPG3201 ADJ
Adjustable output option for PPG3201
PPG3202 ADJ
Adjustable output option for PPG3202
PPG3204 ADJ
Adjustable output option for PPG3204
PPG3201 FXD
Fixed output option for PPG3201
PPG3202 FXD
Fixed output option for PPG3202
PPG3204 FXD
Fixed output option for PPG3204

Power plug options

Opt. A0
North America power plug (115 V, 60 Hz)
Opt. A1
Universal Euro power plug (220 V, 50 Hz)
Opt. A2
United Kingdom power plug (240 V, 50 Hz)
Opt. A6
Japan power plug (100 V, 50/60 Hz)
Opt. A10
China power plug (50 Hz)
Opt. A11
India power plug (50 Hz)
Opt. A99
No power cord

Manuals

071-3413-xx
Printed PPG/PED Installation & Safety instructions
077-1090-xx
Tektronix PPG1600, PPG3000, & PPG3200 PatternPro® Series Pattern Generator User manual, PDF-only, downloadable from Tektronix.com
Модель Описание Максимальная скорость передачи данных
PPG1602

Двухканальный программируемый генератор цифровых последовательностей

16 Гбит/с
 

Specifications

All specifications apply to all models unless noted otherwise.

PPG3200 data outputs

Option FXD Amplitude
DC coupled. Each side of the differential pair swings from -500 mV to 0 V. Ground-referenced CML. Terminiated 50 Ω to ground.
Single-ended
500 mV, typical
Differential
1.0 V, typical
Option FXD Rise/fall time
Scope bandwidth can impact the measured signal rise time.
20 to 80%
8 ps, typical
10 to 90 %
12 ps, typical
Option ADJ Amplitude
Each positive and negative differential output is independently programmable.
Single-ended
300 mV to 1.0 V
Differential
600 mV to 2.0 V
Option ADJ Offset window
-2 V to +3 V, programmable/adjustable
Option ADJ Rise/fall time
Scope bandwidth can impact the measured signal rise time.
20 to 80%
11 ps, typical
10 to 90 %
16 ps, typical
Option ADJ Termination voltage range

-2.0 V to +3.3 V window. Programmable/adjustable. Applied by user via 50 Ω.

This setting is used in cases where the load being driven is terminated at a level other than zero volts. The effect of the termination voltage on the output voltage is shown in the following figure. To ensure proper operation, never load the output with a termination voltage less than Voh minus 3 V.

Data output jitter
250 fsRMS RMS RJ typical at 32 Gb/s using PRBS 211-1 pattern
Connector type
2.4 mm
Output impedance
50 Ω
Single-ended
100 Ω
Differential

PPG3000 & PPG1600 data outputs

Amplitude range
250 mV to 2.0 V
Single-ended
500 mV to 4.0 V
Differential. Each positive and negative differential output is independently programmable.
Offset range
–2 V to +3.0 V window. Programmable/adjustable.
Termination voltage range

-2.0 V to +3.3 V window. Programmable/adjustable. Applied by user via 50 Ω.

This setting is used in cases where the load being driven is terminated at a level other than zero volts. The effect of the termination voltage on the output voltage is shown in the following figure. To ensure proper operation, never load the output with a termination voltage less than Voh minus 3 V.

Crossing point
Programmable/adjustable
Range
35% to 65%, typical. Tested using 50% mark density pattern.
Resolution
1%
Rise/fall time
Scope bandwidth can impact the measured signal rise time.
20% - 80%
17 ps, typical
10% - 90%
25 ps, typical
Data output jitter
350 fsRMS, RJ typical at 28 Gb/s using PRBS 211-1 pattern
Connector type
2.92 mm
Output impedance
50 Ω
Single-ended
100 Ω
Differential

Data patterns

Pattern type
Data (from memory) or PRBS. Length and type are individually settable on multi-channel generators.
Data rate
Programmable/adjustable
Range
1.5 Gb/s to 16 Gb/s, (PPG1600 series)

1.5 Gb/s to 30 Gb/s, (PPG3000 series)

1.5 Gb/s to 32 Gb/s (PPG3200 series)

Resolution
10 kb/s
Accuracy
±5 ppm
PRBS pattern lengths
Independently selected on multi-channel units
27 -1 bits
Polynomial = X7 + X6 + 1 
29 - 1 bits
Polynomial = X9 + X5 + 1 
211 - 1 bits
Polynomial = X11 + X9 + 1 
215 - 1 bits
Polynomial = X15 + X14 + 1 
223 - 1 bits
Polynomial = X23 + X18 + 1 
231 - 1 bits
Polynomial = X31 + X28 + 1 
Data pattern depth
Range
2 to 4,194,304 bits. For 1 channel generator (4 Mbits).

2 to 2,097,152 bits. For 2 or 4 channel generators (2 Mbits/channel).

Resolution
1 bit

Clock outputs

Frequency
The clock outputs are single-ended, applicable for internal clock. The internal clock rate ranges from 15 GHz to 30 GHz (PPG3000 series) and 16 GHz to 32 GHz (PPG1600 and PPG3200 series).
PPG1600 Clock output frequency
(Internal clock)/(n), n = 2,4,8, or 16 user programmable
PPG3000 Clock output frequency
(Internal clock)/(n), n = 1,2,4,8, or 16 user programmable
PPG3200 Divided Clock output frequency
(Internal clock)/(n), n = 2,4,8, or 16 user programmable
PPG3200 Full Rate Clock output frequency (single output for PPG3201/2, quad output for PPG3204)
Internal clock
Amplitude
Amplitude varies with frequency

600 mVp-p, typical; 200 mVp-p minimum; 1.0 Vp-p maximum

Output impedance
50 Ω, AC-coupled
Maximum external DC voltage
±5 V
Jitter
RMS typical, measured by spectrum analyzer on 1010 pattern, phase noise integrated from 1 kHz to 1 GHz.
Connector type
2.92 mm (PPG3000 & PPG1600)

2.4 mm (PPG3200)

Jitter insertion

The pattern generator can be ordered with built-in jitter options. The PPG3200 series are available with Option LFJIT and Option HFJIT; the PPG1600 and PPG3000 series are available with Option HFJIT only. The jitter insertion is the delay modulation of the data channels. Option HFJIT applies to each channel individually; Option LFJIT applies equally to clock and data.


Jitter insertion block diagram


High frequency jitter insertion option (Option HFJIT)

Add-on option for the instrument. Independent jitter sources on each channel. Sum of external, internal sine, and internal noise. Total range depends on modulation frequencies. Exceeding the range can generate errors.

Total modulation range
50 psp-p
Built-in sine source
Programmable from either the front panel touch screen or remote control.
Frequency range
5 kHz to 100 MHz
Amplitude range
0 to 50 psp-p
Accuracy
±10%, typical
Built-in random noise source
Programmable from either the front panel touch screen or remote control.
Amplitude range
0 to 5 psRMS
Accuracy
±10% typical
Built-in BUJ source
Programmable from either the front panel touch screen or remote control.
Amplitude range
0 to 50 psp-p
Modulation data rates
100 Mb/s to 2.5 Gb/s
PRBS sequences
7,9,11,15,23,31 
Filter values
25/50/100 MHz filters
External modulation input
DC coupled, 3 dB bandwidths
Frequency range
DC to 100 MHz
Amplitude range
0 to 50 ps p-p
Maximum input
5 Vp-p
Low frequency jitter insertion (Option LFJIT)
Add-on option.

The specifications below apply when the data rate equals the internal clock rate frequency of 16 to 32 GHz. For each frequency octave below, the internal clock rate, the specifications below will be reduced by half. Thus when the data rate is 8 to 15.99999 Gb/s, the values below will be divided by 2. When the data rate is 4 to 7.99999 Gb/s, the values will be divided by 4.

SJ modulation range curve points
Parameter Value
10 Hz fmod 5000 UIp-p
100 Hz fmod 2000 UIp-p
1 kHz fmod 2000 UIp-p
10 kHz fmod 2000 UIp-p
100 kHz fmod 100 UIp-p
1 MHz fmod 10 UIp-p
4 MHz fmod 1 UIp-p
10 MHz fmod 0.5 UIp-p

Trigger system

Trigger waveform
Pattern mode trigger is synced to channel 1 pattern.
Pattern mode
1 pattern per trigger for pattern length = multiple of 64 

64 patterns per trigger for other pattern lengths

Clock/n mode
64 through (232 - 64), n= any multiple of 64 in that range
Duty cycle
50%, for either Pattern or Clock/n
High level
0 V, typical
Low level
-500 mV, typical
Output impedance
50 Ω, DC-coupled
Connector type
SMA

Clock inputs

Frequency range
15 GHz to 30 GHz, (PPG3000 series)

16 GHz to 32 GHz, (PPG3200 series)

Not applicable for the PPG1600 series.

Input signal
400 mVp-p, typical, AC coupled
Maximum input signal
1 Vp-p
Input impedance
50 Ω, AC-coupled

Reference clock

Input frequency range
10 MHz ±10 ppm
Input signal
1 Vp-p, typical, 50% duty square wave
Maximum input signal
6 Vp-p, ±10 V DC, Damage threshold
Input impedance
50 Ω, AC-coupled
Output signal
1.2 Vp-p, typical, Square wave
10 MHz reference input/output
Yes, BNC connector

Channel skew

Skew adjust
Relative to nominal position
PPG1600 and PPG3000

Range = ±50 ps

Resolution = 100 fs

PPG3200

Range = ±25 ps

Resolution = 100 fs

Pattern shift
Advance or delay. This is equivalent to unlimited shifting since this range allows shifting the longest pattern to any position.
Range
± (230-1)
Resolution
1 bit
Nominal channel to channel pattern skew

Data error insertion

Error insertion types
Single or rate-based
Error insertion rate
Range
1 x 10-3 to 1 x 10-15 BER
Resolution
3 digits

Control interfaces

Front panel touchscreen GUI
Yes, edit all instrument settings.
Computer programmable interface
USB TMC, program all instrument settings.

Physical characteristics

Front panel width (with mounting tabs)
48.3 cm (19.0 in)
Height
1 & 2 channel
13.3 cm (5.25 in)
4 channel
27.9 cm (11.0 in)
Width
45.1 cm (17.75 in)
Depth (rack mount)
35.1 cm (13.8 in)
Weight
1 & 2 channel
11.1 kg (24.5 lbs)
4 channel
20.4 kg (45 lbs)
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)

Связанные приборы